The bag filter of the brick factory is a small size and high dust removal efficiency. The basic structure of this series of units consists of three parts: fan, filter and dust collector. All parts are installed in a vertical frame, steel plate shell, baking paint and rust-proof, beautiful appearance, scientific structure, reliable operation and use. Convenience.

　　The working principle of the bag filter in the brick factory:

　　Dust-containing gas enters the box and is filtered by a flat cloth bag filter. The dust is trapped on the outer surface of the filter bag. The purified gas enters the fan through the filter bag, and is sucked by the fan and discharged directly into the room (it can also be discharged outdoors) . With the increase of filtration time, the dust attached to the outer surface of the filter bag also increases, and the resistance of the filter bag increases accordingly, which affects the dust removal effect. The automatic dust removal mechanism is used for timing rapping and dust removal or the manual dust removal mechanism is shut down. Automatic vibration for tens of seconds to shake off the dust on the outer surface of the filter bag, and the dust that falls into the dust collection container (drawer) is manually pulled out for cleaning.

　　Brick Factory Bag Dust Collector Features:

　　1. The operation of the equipment is relatively stable, the performance is easy to use, and the processing air volume is large, and the dust removal is better.

　　2. Dust is easier to handle, not only the dust collector does not have secondary pollution, so the collected dust can be used. recycle and re-use.

　　3. Flexible use of equipment, installation and transportation are relatively flexible and can be installed indoors or outdoors.

　　4. Bag dust collectors have a relatively small footprint. Generally, small dust collectors occupies about 10 square meters, and large ones need about 20 to 30 square meters. Because of the relatively small area, the installation is more flexible.

　　5. The structure is relatively compact and the design is reasonable. Therefore, the investment is relatively small and the cost is relatively small. It is the choice of environmental protection equipment for most industrial enterprises.

　　6. ​​The bag filter has another great advantage, that is, it can use the pulse valve to automatically spray and clean the dust, without additional manual care, when the dust is collected to a certain level, it will start the automatic dust spray mode.

　　7. Good ash removal effect, high dust removal efficiency, low emission concentration, low product energy consumption, less floor space, stable and reliable equipment operation, and good economic benefits.

　　8. Using pulse blowing to clean the ash, only one blow can achieve the clean ash effect. At the same time, the ash removal cycle is prolonged, which can also reduce the energy consumption of ash removal, and the compressed air consumption will also be reduced. At this time, the loss of the filter bag and the pulse valve is also reduced accordingly, so that the service life of the filter bag and the valve plate can be improved.

　　9. The bag cage structure adopts a universal filter bag, which makes the replacement of the filter bag faster, simpler and cleaner. At the same time, the filter bag mouth adopts an elastic expansion ring, which has good sealing performance, safe, firm and reliable. The filter bag keel adopts a polygonal shape, which reduces the friction between the filter bag and the keel, thereby prolonging the service life of the filter bag and making it easy to unload the bag.

　　10. The bag is drawn from the upper part of the chassis. When changing the bag, you only need to pull out the skeleton, and then put the dirty bag into the ash hopper at the lower part of the equipment box and take it out from the inspection port.

　　11. The box body is designed with airtightness and has good sealing performance. At the same time, the inspection door uses high-quality sealing materials to reduce leakage.

　　12. The inlet and outlet air ducts of the dust collector are arranged tightly, and the airflow resistance generated is small.